HP05

Hygienic · 316L stainless steel. Food, pharmaceutical and cosmetic. Clamp connection.

Flow: 55l/dk
Connection: ¾inch
Discharge head: 70m
Solids passage: 3mm

Diaphragm and valve material

Valve type

Ball valve: for viscous fluids and small solids.

Configuration codeHP05-SS-NE-BThe code structure is for the prototype only; the final coding will be matched to the catalog.

Price and lead time are in the quote. If you tell us your fluid, our engineer will check the elastomer selection.

Technical specifications

Body material	316L stainless steel
Flow (maximum)	55 l/dk
Inlet – outlet	¾″
Operating pressure (maximum)	7 bar
Discharge head (maximum)	70 m
Suction lift	6 m
Operating temperature	−18 … +100 °C
Air inlet	¼″
Solids passage	3 mm
Weight	6,5 kg
Elastomer options	Neoprene, Buna-N, EPDM, Viton, Santoprene, Teflon
Connection type	Clamp

Compare within the series

Other sizes in the same body. Click a row to switch the page to that model.

Model	Flow (l/dk)	Connection	Weight (kg)
HP05	55	¾″	6,5
HP10	150	1″	12,0
HP15	400	1½″	26,0
HP20	560	2″	31,0
HP30	890	3″	65,0

Performance

The catalog curves give the flow–head relationship according to the air inlet pressure and air consumption. In this prototype only the catalog end values are marked; intermediate curves will be added with test data.

55 l/dkMaximum flow in free discharge
7 barMaximum operating pressure at the air inlet
6 mDry suction lift

The dashed line joins the end points; it is not an actual curve.

Working principle

Two diaphragms are connected to each other by a common shaft. The air valve directs compressed air alternately into the diaphragm chambers; while one diaphragm pushes the fluid, the other one draws suction. The valve changes direction at the end of the stroke.

Animated explanation

Dry-run resistantNo heating or wear occurs when the line runs empty.
Safe stop against back pressureStops when the discharge line is closed and resumes pumping when it is opened.
Suitable for explosive atmospheresContains no electric motor and no electrical connection.
Simple constructionContains no mechanical seal, rotor or impeller; maintenance needs are low.